本文整理汇总了Java中com.jsyn.unitgen.SawtoothOscillatorBL类的典型用法代码示例。如果您正苦于以下问题:Java SawtoothOscillatorBL类的具体用法?Java SawtoothOscillatorBL怎么用?Java SawtoothOscillatorBL使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
SawtoothOscillatorBL类属于com.jsyn.unitgen包,在下文中一共展示了SawtoothOscillatorBL类的13个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Java代码示例。
示例1: init
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
public void init()
{
synth = JSyn.createSynthesizer();
// Add a tone generator. (band limited sawtooth)
synth.add( osc = new SawtoothOscillatorBL() );
// Add a lag to smooth out amplitude changes and avoid pops.
synth.add( lag = new LinearRamp() );
// Add an output mixer.
synth.add( lineOut = new LineOut() );
// Connect the oscillator to both left and right output.
osc.output.connect( 0, lineOut.input, 0 );
osc.output.connect( 0, lineOut.input, 1 );
// Set the minimum, current and maximum values for the port.
lag.output.connect( osc.amplitude );
lag.input.setup( 0.0, 0.5, 1.0 );
lag.time.set( 0.2 );
// Arrange the faders in a stack.
setLayout( new GridLayout( 0, 1 ) );
ExponentialRangeModel amplitudeModel = PortModelFactory.createExponentialModel( lag.input );
RotaryTextController knob = new RotaryTextController( amplitudeModel, 5 );
JPanel knobPanel = new JPanel();
knobPanel.add( knob );
add( knobPanel );
osc.frequency.setup( 50.0, 300.0, 10000.0 );
add( PortControllerFactory.createExponentialPortSlider( osc.frequency ) );
validate();
}
开发者ID:WiredProgrammers,项目名称:collegeProjects,代码行数:33,代码来源:SawFaders.java
示例2: start
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void start()
{
synth = JSyn.createSynthesizer();
// Add an LFO.
synth.add( lfo = new SineOscillator() );
synth.add( adder = new Add() );
// Add an output so we can hear the oscillators.
synth.add( lineOut = new LineOut() );
lfo.frequency.set( 0.1 );
lfo.amplitude.set( 200.0 );
adder.inputB.set( 400.0 );
lfo.output.connect( adder.inputA );
oscillators.add( new SawtoothOscillatorBL() );
oscillators.add( new SineOscillator() );
oscillators.add( new TriangleOscillator() );
for( UnitOscillator osc : oscillators)
{
synth.add( osc);
adder.output.connect( osc.frequency );
osc.output.connect( 0, lineOut.input, 0 );
osc.amplitude.set( 0.2 );
}
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// Start lineOut so it can pull data from other units.
lineOut.start();
setupGUI();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
}
开发者ID:vocobox,项目名称:vocobox,代码行数:40,代码来源:ShowWaves.java
示例3: init
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void init()
{
synth = JSyn.createSynthesizer();
// Add a tone generator. (band limited sawtooth)
synth.add( osc = new SawtoothOscillatorBL() );
// Add a lag to smooth out amplitude changes and avoid pops.
synth.add( lag = new LinearRamp() );
// Add an output mixer.
synth.add( lineOut = new LineOut() );
// Connect the oscillator to both left and right output.
osc.output.connect( 0, lineOut.input, 0 );
osc.output.connect( 0, lineOut.input, 1 );
// Set the minimum, current and maximum values for the port.
lag.output.connect( osc.amplitude );
lag.input.setup( 0.0, 0.5, 1.0 );
lag.time.set( 0.2 );
// Arrange the faders in a stack.
setLayout( new GridLayout( 0, 1 ) );
ExponentialRangeModel amplitudeModel = PortModelFactory.createExponentialModel( lag.input );
RotaryTextController knob = new RotaryTextController( amplitudeModel, 5 );
JPanel knobPanel = new JPanel();
knobPanel.add( knob );
add( knobPanel );
osc.frequency.setup( 50.0, 300.0, 10000.0 );
add( PortControllerFactory.createExponentialPortSlider( osc.frequency ) );
validate();
}
开发者ID:vocobox,项目名称:vocobox,代码行数:34,代码来源:SawFaders.java
示例4: SubtractiveSynthVoice
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
public SubtractiveSynthVoice() {
add(frequencyScaler = new Multiply());
// Add a tone generator.
add(osc = new SawtoothOscillatorBL());
// Use an envelope to control the amplitude.
add(ampEnv = new EnvelopeDAHDSR());
// Use an envelope to control the filter cutoff.
add(filterEnv = new EnvelopeDAHDSR());
add(filter = new FilterLowPass());
add(cutoffAdder = new Add());
filterEnv.output.connect(cutoffAdder.inputA);
cutoffAdder.output.connect(filter.frequency);
frequencyScaler.output.connect(osc.frequency);
osc.output.connect(filter.input);
filter.output.connect(ampEnv.amplitude);
addPort(amplitude = osc.amplitude, "Amplitude");
addPort(frequency = frequencyScaler.inputA, "Frequency");
addPort(pitchModulation = frequencyScaler.inputB, "PitchMod");
addPort(cutoff = cutoffAdder.inputB, "Cutoff");
addPort(cutoffRange = filterEnv.amplitude, "CutoffRange");
addPort(Q = filter.Q);
ampEnv.export(this, "Amp");
filterEnv.export(this, "Filter");
frequency.setup(osc.frequency);
pitchModulation.setup(0.2, 1.0, 4.0);
cutoff.setup(filter.frequency);
cutoffRange.setup(filter.frequency);
// Make the circuit turn off when the envelope finishes to reduce CPU load.
ampEnv.setupAutoDisable(this);
usePreset(0);
}
开发者ID:philburk,项目名称:jsyn,代码行数:40,代码来源:SubtractiveSynthVoice.java
示例5: start
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void start() {
synth = JSyn.createSynthesizer();
// Add an LFO.
synth.add(lfo = new SineOscillator());
synth.add(adder = new Add());
// Add an output so we can hear the oscillators.
synth.add(lineOut = new LineOut());
lfo.frequency.set(0.1);
lfo.amplitude.set(200.0);
adder.inputB.set(400.0);
lfo.output.connect(adder.inputA);
oscillators.add(new SawtoothOscillatorBL());
oscillators.add(new SineOscillator());
oscillators.add(new TriangleOscillator());
for (UnitOscillator osc : oscillators) {
synth.add(osc);
adder.output.connect(osc.frequency);
osc.output.connect(0, lineOut.input, 0);
osc.amplitude.set(0.2);
}
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// Start lineOut so it can pull data from other units.
lineOut.start();
setupGUI();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
}
开发者ID:philburk,项目名称:jsyn,代码行数:38,代码来源:ShowWaves.java
示例6: init
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void init() {
synth = JSyn.createSynthesizer();
synth.add(oscillator = new SawtoothOscillatorBL());
synth.add(rampCutoff = new LinearRamp());
synth.add(tieQ = new PassThrough());
synth.add(tieCutoff = new PassThrough());
synth.add(filterMoog = new FilterFourPoles());
synth.add(filterBiquad = new FilterLowPass());
synth.add(mixer = new PassThrough());
synth.add(lineOut = new LineOut());
oscillator.output.connect(filterMoog.input);
oscillator.output.connect(filterBiquad.input);
if (useCutoffRamp) {
rampCutoff.output.connect(filterMoog.frequency);
rampCutoff.output.connect(filterBiquad.frequency);
rampCutoff.time.set(0.000);
} else {
tieCutoff.output.connect(filterMoog.frequency);
tieCutoff.output.connect(filterBiquad.frequency);
}
tieQ.output.connect(filterMoog.Q);
tieQ.output.connect(filterBiquad.Q);
filterMoog.output.connect(mixer.input);
mixer.output.connect(0, lineOut.input, 0);
mixer.output.connect(0, lineOut.input, 1);
filterBiquad.amplitude.set(0.1);
oscillator.frequency.setup(50.0, 130.0, 3000.0);
oscillator.amplitude.setup(0.0, 0.336, 1.0);
rampCutoff.input.setup(filterMoog.frequency);
tieCutoff.input.setup(filterMoog.frequency);
tieQ.input.setup(0.1, 0.7, 10.0);
setupGUI();
}
开发者ID:philburk,项目名称:jsyn,代码行数:37,代码来源:HearMoogFilter.java
示例7: init
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void init() {
synth = JSyn.createSynthesizer();
// Add a tone generator. (band limited sawtooth)
synth.add(osc = new SawtoothOscillatorBL());
// Add a lag to smooth out amplitude changes and avoid pops.
synth.add(lag = new LinearRamp());
// Add an output mixer.
synth.add(lineOut = new LineOut());
// Connect the oscillator to both left and right output.
osc.output.connect(0, lineOut.input, 0);
osc.output.connect(0, lineOut.input, 1);
// Set the minimum, current and maximum values for the port.
lag.output.connect(osc.amplitude);
lag.input.setup(0.0, 0.5, 1.0);
lag.time.set(0.2);
// Arrange the faders in a stack.
setLayout(new GridLayout(0, 1));
ExponentialRangeModel amplitudeModel = PortModelFactory.createExponentialModel(lag.input);
RotaryTextController knob = new RotaryTextController(amplitudeModel, 5);
JPanel knobPanel = new JPanel();
knobPanel.add(knob);
add(knobPanel);
osc.frequency.setup(50.0, 300.0, 10000.0);
add(PortControllerFactory.createExponentialPortSlider(osc.frequency));
validate();
}
开发者ID:philburk,项目名称:jsyn,代码行数:33,代码来源:SawFaders.java
示例8: start
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void start()
{
synth = JSyn.createSynthesizer();
// Use a multiplier for gain control and so we can hook up to the scope
// from a single unit.
synth.add( oscGain = new Multiply() );
oscGain.inputB.setup( 0.02, 0.5, 1.0 );
oscGain.inputB.setName( "Amplitude" );
synth.add( freqRamp = new LinearRamp() );
freqRamp.input.setup( 50.0, 300.0, 20000.0 );
freqRamp.input.setName( "Frequency" );
freqRamp.time.set( 0.1 );
// Add an output so we can hear the oscillators.
synth.add( lineOut = new LineOut() );
oscGain.output.connect( lineOut.input );
setupGUI();
buttonGroup = new ButtonGroup();
addOscillator( new SineOscillator(), "Sine" );
addOscillator( new TriangleOscillator(), "Triangle" );
addOscillator( new SawtoothOscillator(), "Sawtooth" );
addOscillator( new SawtoothOscillatorBL(), "SawBL" );
addOscillator( new SawtoothOscillatorDPW(), "SawDPW" );
addOscillator( new RedNoise(), "RedNoise" );
addOscillator( new SquareOscillator(), "Square" );
addOscillator( new SquareOscillatorBL(), "SquareBL" );
addOscillator( new PulseOscillator(), "Pulse" );
addOscillator( new PulseOscillatorBL(), "PulseBL" );
addOscillator( new ImpulseOscillator(), "Impulse" );
addOscillator( new ImpulseOscillatorBL(), "ImpulseBL" );
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// Start lineOut so it can pull data from other units.
lineOut.start();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
}
开发者ID:vocobox,项目名称:vocobox,代码行数:50,代码来源:SeeOscillators.java
示例9: test
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
private void test()
{
// Create a context for the synthesizer.
synth = JSyn.createSynthesizer();
// Add a tone generator.
synth.add( osc = new SawtoothOscillatorBL() );
// Add an output mixer.
synth.add( lineOut = new LineOut() );
// Connect the oscillator to the left and right audio output.
osc.output.connect( 0, lineOut.input, 0 );
osc.output.connect( 0, lineOut.input, 1 );
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
// Get synthesizer time in seconds.
double timeNow = synth.getCurrentTime();
// Advance to a near future time so we have a clean start.
double time = timeNow + 0.5;
double freq = 400.0; // hertz
osc.frequency.set( freq, time );
// Schedule this to happen a bit later.
time += 0.5;
freq *= 1.5; // up a perfect fifth
osc.frequency.set( freq, time );
time += 0.5;
freq *= 4.0 / 5.0; // down a major third
osc.frequency.set( freq, time );
// Sleep while the sound is being generated in the background thread.
try
{
synth.sleepUntil( time + 0.5 );
} catch( InterruptedException e )
{
e.printStackTrace();
}
// Stop everything.
synth.stop();
}
开发者ID:vocobox,项目名称:vocobox,代码行数:50,代码来源:PlaySequence.java
示例10: test
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
private void test()
{
// Create a context for the synthesizer.
synth = JSyn.createSynthesizer();
// Add a tone generator.
synth.add( osc = new SawtoothOscillatorBL() );
// Add an envelope player.
synth.add( envelopePlayer = new VariableRateMonoReader() );
// Create an envelope consisting of (duration,value) pairs.
double[] pairs = { 0.1, 1.0, 0.2, 0.5, 0.6, 0.0 };
envelope = new SegmentedEnvelope( pairs );
// Add an output mixer.
synth.add( lineOut = new LineOut() );
envelopePlayer.output.connect( osc.amplitude );
// Connect the oscillator to the output.
osc.output.connect( 0, lineOut.input, 0 );
osc.output.connect( 0, lineOut.input, 1 );
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// We only need to start the LineOut. It will pull data from the other
// units.
lineOut.start();
try
{
// Queue an envelope with callbacks.
QueueDataCommand command = envelopePlayer.dataQueue.createQueueDataCommand( envelope, 0,
envelope.getNumFrames() );
// Create an object to be called when the queued data is done.
TestQueueCallback callback = new TestQueueCallback();
command.setCallback( callback );
command.setNumLoops( 2 );
envelopePlayer.rate.set( 0.2 );
synth.queueCommand( command );
synth.sleepFor( 20.0 );
} catch( InterruptedException e )
{
e.printStackTrace();
}
// Stop everything.
synth.stop();
}
开发者ID:vocobox,项目名称:vocobox,代码行数:47,代码来源:PlaySegmentedEnvelopeCallback.java
示例11: start
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
@Override
public void start() {
synth = JSyn.createSynthesizer();
// Use a multiplier for gain control and so we can hook up to the scope
// from a single unit.
synth.add(oscGain = new Multiply());
oscGain.inputB.setup(0.02, 0.5, 1.0);
oscGain.inputB.setName("Amplitude");
synth.add(freqRamp = new LinearRamp());
freqRamp.input.setup(50.0, 300.0, 20000.0);
freqRamp.input.setName("Frequency");
freqRamp.time.set(0.1);
synth.add(widthRamp = new LinearRamp());
widthRamp.input.setup(-1.0, 0.0, 1.0);
widthRamp.input.setName("Width");
widthRamp.time.set(0.1);
synth.add(shapeRamp = new LinearRamp());
shapeRamp.input.setup(-1.0, 0.0, 1.0);
shapeRamp.input.setName("Shape");
shapeRamp.time.set(0.1);
// Add an output so we can hear the oscillators.
synth.add(lineOut = new LineOut());
oscGain.output.connect(0, lineOut.input, 0);
oscGain.output.connect(0, lineOut.input, 1);
setupGUI();
buttonGroup = new ButtonGroup();
addOscillator(new SineOscillator(), "Sine");
addOscillator(new TriangleOscillator(), "Triangle");
addOscillator(new SawtoothOscillator(), "Sawtooth");
addOscillator(new SawtoothOscillatorBL(), "SawBL");
addOscillator(new SawtoothOscillatorDPW(), "SawDPW");
addOscillator(new RedNoise(), "RedNoise");
addOscillator(new SquareOscillator(), "Square");
addOscillator(new SquareOscillatorBL(), "SquareBL");
addOscillator(new PulseOscillator(), "Pulse");
addOscillator(new PulseOscillatorBL(), "PulseBL");
addOscillator(new MorphingOscillatorBL(), "MorphBL");
addOscillator(new ImpulseOscillator(), "Impulse");
addOscillator(new ImpulseOscillatorBL(), "ImpulseBL");
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// Start lineOut so it can pull data from other units.
lineOut.start();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
}
开发者ID:philburk,项目名称:jsyn,代码行数:61,代码来源:SeeOscillators.java
示例12: test
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
private void test() {
// Create a context for the synthesizer.
synth = JSyn.createSynthesizer();
// Add a tone generator.
synth.add(osc = new SawtoothOscillatorBL());
// Add an output mixer.
synth.add(lineOut = new LineOut());
// Connect the oscillator to the left and right audio output.
osc.output.connect(0, lineOut.input, 0);
osc.output.connect(0, lineOut.input, 1);
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// We only need to start the LineOut. It will pull data from the
// oscillator.
lineOut.start();
// Get synthesizer time in seconds.
double timeNow = synth.getCurrentTime();
// Advance to a near future time so we have a clean start.
double time = timeNow + 0.5;
double freq = 400.0; // hertz
osc.frequency.set(freq, time);
// Schedule this to happen a bit later.
time += 0.5;
freq *= 1.5; // up a perfect fifth
osc.frequency.set(freq, time);
time += 0.5;
freq *= 4.0 / 5.0; // down a major third
osc.frequency.set(freq, time);
// Sleep while the sound is being generated in the background thread.
try {
synth.sleepUntil(time + 0.5);
} catch (InterruptedException e) {
e.printStackTrace();
}
// Stop everything.
synth.stop();
}
开发者ID:philburk,项目名称:jsyn,代码行数:47,代码来源:PlaySequence.java
示例13: test
import com.jsyn.unitgen.SawtoothOscillatorBL; //导入依赖的package包/类
private void test() {
// Create a context for the synthesizer.
synth = JSyn.createSynthesizer();
// Add a tone generator.
synth.add(osc = new SawtoothOscillatorBL());
// Add an envelope player.
synth.add(envelopePlayer = new VariableRateMonoReader());
// Create an envelope consisting of (duration,value) pairs.
double[] pairs = {
0.1, 1.0, 0.2, 0.5, 0.6, 0.0
};
envelope = new SegmentedEnvelope(pairs);
// Add an output mixer.
synth.add(lineOut = new LineOut());
envelopePlayer.output.connect(osc.amplitude);
// Connect the oscillator to the output.
osc.output.connect(0, lineOut.input, 0);
osc.output.connect(0, lineOut.input, 1);
// Start synthesizer using default stereo output at 44100 Hz.
synth.start();
// We only need to start the LineOut. It will pull data from the other
// units.
lineOut.start();
try {
// Queue an envelope with callbacks.
QueueDataCommand command = envelopePlayer.dataQueue.createQueueDataCommand(envelope, 0,
envelope.getNumFrames());
// Create an object to be called when the queued data is done.
TestQueueCallback callback = new TestQueueCallback();
command.setCallback(callback);
command.setNumLoops(2);
envelopePlayer.rate.set(0.2);
synth.queueCommand(command);
synth.sleepFor(20.0);
} catch (InterruptedException e) {
e.printStackTrace();
}
// Stop everything.
synth.stop();
}
开发者ID:philburk,项目名称:jsyn,代码行数:46,代码来源:PlaySegmentedEnvelopeCallback.java
注:本文中的com.jsyn.unitgen.SawtoothOscillatorBL类示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论