Python util.build_SIL函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中util.build_SIL函数的典型用法代码示例。如果您正苦于以下问题：Python build_SIL函数的具体用法？Python build_SIL怎么用？Python build_SIL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了build_SIL函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: fly_CopterAVC

def fly_CopterAVC(viewerip=None, map=False):
    '''fly ArduCopter in SIL for AVC2013 mission
    '''
    global homeloc

    if TARGET != 'sitl':
        util.build_SIL('ArduCopter', target=TARGET)

    home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
    sil = util.start_SIL('ArduCopter', wipe=True, model='heli', home=home, speedup=speedup_default)
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550')
    mavproxy.expect('Received [0-9]+ parameters')

    # setup test parameters
    mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
    mavproxy.expect('Loaded [0-9]+ parameters')

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL('ArduCopter', model='heli', home=home, speedup=speedup_default)
    options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5'
    if viewerip:
        options += ' --out=%s:14550' % viewerip
    if map:
        options += ' --map'
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
    mavproxy.expect('Telemetry log: (\S+)')
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
    print("buildlog=%s" % buildlog)
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    try:
        os.link(logfile, buildlog)
    except Exception:
        pass

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sil, mavproxy])

    if map:
        mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
        mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')        

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:CHRADI，项目名称:ardupilot，代码行数:60，代码来源:arducopter.py

示例2: run_step

def run_step(step):
    '''run one step'''
    if step == "prerequesites":
        return test_prerequesites()

    if step == 'build.ArduPlane':
        return util.build_SIL('ArduPlane')

    if step == 'build.APMrover2':
        return util.build_SIL('APMrover2')

    if step == 'build.ArduCopter':
        return util.build_SIL('ArduCopter')

    if step == 'build2560.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega2560')

    if step == 'build2560.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega2560')

    if step == 'build2560.APMrover2':
        return util.build_AVR('APMrover2', board='mega2560')

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane')

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter')

    if step == 'defaults.APMrover2':
        return get_default_params('APMrover2')

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.CopterAVC':
        return arducopter.fly_CopterAVC(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.ArduPlane':
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip, map=opts.map)

    if step == 'drive.APMrover2':
        return apmrover2.drive_APMrover2(viewerip=opts.viewerip, map=opts.map, console=opts.console)

    if step == 'build.All':
        return build_all()

    if step == 'build.Binaries':
        return build_binaries()

    if step == 'build.Examples':
        return build_examples()

    if step == 'build.Parameters':
        return build_parameters()

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:robolamp，项目名称:rAutotest，代码行数:60，代码来源:autotest-opt.py

示例3: run_step

def run_step(step):
    '''run one step'''

    # remove old logs
    util.run_cmd('/bin/rm -f logs/*.BIN logs/LASTLOG.TXT')

    if step == "prerequisites":
        return test_prerequisites()

    if step == 'build.ArduPlane':
        return util.build_SIL('ArduPlane')

    if step == 'build.APMrover2':
        return util.build_SIL('APMrover2')

    if step == 'build.ArduCopter':
        return util.build_SIL('ArduCopter')

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane')

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter')

    if step == 'defaults.APMrover2':
        return get_default_params('APMrover2')

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.CopterAVC':
        return arducopter.fly_CopterAVC(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.ArduPlane':
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip, map=opts.map)

    if step == 'drive.APMrover2':
        return apmrover2.drive_APMrover2(viewerip=opts.viewerip, map=opts.map)

    if step == 'build.All':
        return build_all()

    if step == 'build.Binaries':
        return build_binaries()

    if step == 'build.DevRelease':
        return build_devrelease()

    if step == 'build.Examples':
        return build_examples()

    if step == 'build.Parameters':
        return build_parameters()

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:cfluking，项目名称:ardupilot，代码行数:58，代码来源:autotest.py

示例4: run_step

def run_step(step):

    # Process any flags to be passed into build
    myFlags=None
    if opts.incremental == True:
        myFlags = { 'incremental': True }

    '''run one step'''
    if step == "prerequesites":
        return test_prerequesites()

    if step == 'build.ArduPlane':
        return util.build_SIL('ArduPlane', flags=myFlags)

    if step == 'build.ArduCopter':
        return util.build_SIL('ArduCopter', flags=myFlags )

    if step == 'build2560.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega2560')

    if step == 'build2560.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega2560')

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane')

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter')

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.CopterAVC':
        return arducopter.fly_CopterAVC(viewerip=opts.viewerip, map=opts.map)

    if step == 'fly.ArduPlane':
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip, map=opts.map)

    if step == 'build.All':
        return build_all()

    if step == 'build.Binaries':
        return build_binaries()

    if step == 'build.Examples':
        return build_examples()

    if step == 'build.Parameters':
        return build_parameters()

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:nwind21，项目名称:ardupilot，代码行数:54，代码来源:autotest_n21.py

示例5: run_step

def run_step(step):
    '''run one step'''
    if step == "prerequesites":
        return test_prerequesites()

    if step == 'build.ArduPlane':
        return util.build_SIL('ArduPlane')

    if step == 'build.ArduCopter':
        return util.build_SIL('ArduCopter')

    if step == 'build1280.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega')

    if step == 'build2560.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega2560')

    if step == 'build1280.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega')

    if step == 'build2560.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega2560')

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane')

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter')

    if step == 'logs.ArduPlane':
        return dump_logs('ArduPlane')

    if step == 'logs.ArduCopter':
        return dump_logs('ArduCopter')

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip)

    if step == 'fly.ArduPlane':
        if not opts.experimental:
            print("DISABLED: use --experimental to enable fly.ArduPlane")
            return True
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip)

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:BernieLiu，项目名称:ardupilotone，代码行数:48，代码来源:autotest.py

示例6: run_step

def run_step(step):
    '''run one step'''
    if step == "prerequesites":
        return test_prerequesites()

    if step == 'build.ArduPlane':
        return util.build_SIL('ArduPlane')

    if step == 'build.ArduCopter':
        return util.build_SIL('ArduCopter')

    if step == 'build1280.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega')

    if step == 'build2560.ArduCopter':
        return util.build_AVR('ArduCopter', board='mega2560')

    if step == 'build1280.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega')

    if step == 'build2560.ArduPlane':
        return util.build_AVR('ArduPlane', board='mega2560')

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane')

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter')

    if step == 'logs.ArduPlane':
        return dump_logs('ArduPlane')

    if step == 'logs.ArduCopter':
        return dump_logs('ArduCopter')

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip)

    if step == 'fly.ArduPlane':
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip)

    if step == 'build.All':
        return build_all()

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:mmcguinn，项目名称:UML-S12-UAV，代码行数:48，代码来源:autotest.py

示例7: fly_ArduCopter

def fly_ArduCopter(viewerip=None, map=False):
    '''fly ArduCopter in SIL

    you can pass viewerip as an IP address to optionally send fg and
    mavproxy packets too for local viewing of the flight in real time
    '''
    global homeloc

    if TARGET != 'sitl':
        util.build_SIL('ArduCopter', target=TARGET)

    home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
    sil = util.start_SIL('ArduCopter', wipe=True, model='+', home=home, speedup=speedup_default)
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
    mavproxy.expect('Received [0-9]+ parameters')

    # setup test parameters
    mavproxy.send("param load %s/copter_params.parm\n" % testdir)
    mavproxy.expect('Loaded [0-9]+ parameters')

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL('ArduCopter', model='+', home=home, speedup=speedup_default)
    options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
    if viewerip:
        options += ' --out=%s:14550' % viewerip
    if map:
        options += ' --map'
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
    mavproxy.expect('Telemetry log: (\S+)')
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
    print("buildlog=%s" % buildlog)
    copyTLog = False
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    try:
        os.link(logfile, buildlog)
    except Exception:
        print( "WARN: Failed to create symlink: " + logfile + " => " + buildlog + ", Will copy tlog manually to target location" )
        copyTLog = True

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sil, mavproxy])

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:CHRADI，项目名称:ardupilot，代码行数:61，代码来源:arducopter.py

示例8: fly_CopterAVC

def fly_CopterAVC(viewerip=None, map=False):
    '''fly ArduCopter in SIL for AVC2013 mission
    '''
    global homeloc

    if TARGET != 'sitl':
        util.build_SIL('ArduCopter', target=TARGET)

    sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
        FRAME, AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
    if viewerip:
        sim_cmd += ' --fgout=%s:5503' % viewerip

    sil = util.start_SIL('ArduCopter', wipe=True)
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
    mavproxy.expect('Received [0-9]+ parameters')

    # setup test parameters
    mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
    mavproxy.send("param load %s/CopterAVC.parm\n" % testdir)
    mavproxy.expect('Loaded [0-9]+ parameters')

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL('ArduCopter', height=HOME.alt)
    sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
    sim.delaybeforesend = 0
    util.pexpect_autoclose(sim)
    options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
    if viewerip:
        options += ' --out=%s:14550' % viewerip
    if map:
        options += ' --map'
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
    mavproxy.expect('Logging to (\S+)')
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
    print("buildlog=%s" % buildlog)
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    os.link(logfile, buildlog)

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sim, sil, mavproxy])

    if map:
        mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
        mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')        

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:jschall，项目名称:ardupilot，代码行数:65，代码来源:arducopter.py

示例9: fly_ArduCopter

def fly_ArduCopter(viewerip=None):
    '''fly ArduCopter in SIL

    you can pass viewerip as an IP address to optionally send fg and
    mavproxy packets too for local viewing of the flight in real time
    '''
    global homeloc

    if TARGET != 'sitl':
        util.build_SIL('ArduCopter', target=TARGET)

    sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
        FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
    sim_cmd += ' --wind=6,45,.3'
    if viewerip:
        sim_cmd += ' --fgout=%s:5503' % viewerip

    sil = util.start_SIL('ArduCopter', wipe=True)
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
    mavproxy.expect('Received [0-9]+ parameters')

    # setup test parameters
    mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
    mavproxy.send("param load %s/ArduCopter.parm\n" % testdir)
    mavproxy.expect('Loaded [0-9]+ parameters')

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL('ArduCopter', height=HOME.alt)
    sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
    sim.delaybeforesend = 0
    util.pexpect_autoclose(sim)
    options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
    if viewerip:
        options += ' --out=%s:14550' % viewerip
    mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
    mavproxy.expect('Logging to (\S+)')
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/ArduCopter-test.mavlog")
    print("buildlog=%s" % buildlog)
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    os.link(logfile, buildlog)

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
    mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sim, sil, mavproxy])

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:dbaldwin，项目名称:ardupilot，代码行数:63，代码来源:arducopter.py

示例10: run_step

def run_step(step):
    '''run one step'''

    # remove old logs
    util.run_cmd('/bin/rm -f logs/*.BIN logs/LASTLOG.TXT')

    if step == "prerequisites":
        return test_prerequisites()

    if step == 'build.ArduPlane':
        return util.build_SIL('bin/arduplane', j=opts.j, debug=opts.debug)

    if step == 'build.APMrover2':
        return util.build_SIL('bin/ardurover', j=opts.j, debug=opts.debug)

    if step == 'build.ArduCopter':
        return util.build_SIL('bin/arducopter-quad', j=opts.j, debug=opts.debug)

    if step == 'build.AntennaTracker':
        return util.build_SIL('bin/antennatracker', j=opts.j, debug=opts.debug)

    if step == 'build.Helicopter':
        return util.build_SIL('bin/arducopter-heli', j=opts.j, debug=opts.debug)

    binary = binary_path(step, debug=opts.debug)

    if step == 'defaults.ArduPlane':
        return get_default_params('ArduPlane', binary)

    if step == 'defaults.ArduCopter':
        return get_default_params('ArduCopter', binary)

    if step == 'defaults.APMrover2':
        return get_default_params('APMrover2', binary)

    if step == 'fly.ArduCopter':
        return arducopter.fly_ArduCopter(binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb)

    if step == 'fly.CopterAVC':
        return arducopter.fly_CopterAVC(binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb)

    if step == 'fly.ArduPlane':
        return arduplane.fly_ArduPlane(binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb)

    if step == 'fly.QuadPlane':
        return quadplane.fly_QuadPlane(binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb)

    if step == 'drive.APMrover2':
        return apmrover2.drive_APMrover2(binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb)

    if step == 'build.All':
        return build_all()

    if step == 'build.Binaries':
        return build_binaries()

    if step == 'build.DevRelease':
        return build_devrelease()

    if step == 'build.Examples':
        return build_examples()

    if step == 'build.Parameters':
        return build_parameters()

    if step == 'convertgpx':
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:A-Manzoori，项目名称:ardupilot，代码行数:69，代码来源:autotest.py

示例11: fly_ArduCopter

def fly_ArduCopter(viewerip=None, map=False):
    """fly ArduCopter in SIL

    you can pass viewerip as an IP address to optionally send fg and
    mavproxy packets too for local viewing of the flight in real time
    """
    global homeloc

    if TARGET != "sitl":
        util.build_SIL("ArduCopter", target=TARGET)

    sim_cmd = util.reltopdir(
        "Tools/autotest/pysim/sim_multicopter.py"
    ) + " --frame=%s --rate=400 --home=%f,%f,%u,%u" % (FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
    sim_cmd += " --wind=6,45,.3"
    if viewerip:
        sim_cmd += " --fgout=%s:5503" % viewerip

    sil = util.start_SIL("ArduCopter", wipe=True)
    mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter")
    mavproxy.expect("Received [0-9]+ parameters")

    # setup test parameters
    mavproxy.send("param load %s/copter_params.parm\n" % testdir)
    mavproxy.expect("Loaded [0-9]+ parameters")

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL("ArduCopter", height=HOME.alt)
    sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
    sim.delaybeforesend = 0
    util.pexpect_autoclose(sim)
    options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5"
    if viewerip:
        options += " --out=%s:14550" % viewerip
    if map:
        options += " --map"
    mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
    mavproxy.expect("Logging to (\S+)")
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
    print("buildlog=%s" % buildlog)
    copyTLog = False
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    try:
        os.link(logfile, buildlog)
    except Exception:
        print(
            "WARN: Failed to create symlink: "
            + logfile
            + " => "
            + buildlog
            + ", Will copy tlog manually to target location"
        )
        copyTLog = True

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
    mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sim, sil, mavproxy])

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:MarkMote，项目名称:ardupilot，代码行数:76，代码来源:arducopter.py

示例12: run_step

def run_step(step):
    """run one step"""

    # remove old logs
    util.run_cmd("/bin/rm -f logs/*.BIN logs/LASTLOG.TXT")

    if step == "prerequisites":
        return test_prerequisites()

    if step == "build.ArduPlane":
        return util.build_SIL("ArduPlane")

    if step == "build.APMrover2":
        return util.build_SIL("APMrover2")

    if step == "build.ArduCopter":
        return util.build_SIL("ArduCopter")

    if step == "build2560.ArduCopter":
        return util.build_AVR("ArduCopter", board="mega2560")

    if step == "build2560.ArduPlane":
        return util.build_AVR("ArduPlane", board="mega2560")

    if step == "build2560.APMrover2":
        return util.build_AVR("APMrover2", board="mega2560")

    if step == "defaults.ArduPlane":
        return get_default_params("ArduPlane")

    if step == "defaults.ArduCopter":
        return get_default_params("ArduCopter")

    if step == "defaults.APMrover2":
        return get_default_params("APMrover2")

    if step == "fly.ArduCopter":
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip, map=opts.map)

    if step == "fly.CopterAVC":
        return arducopter.fly_CopterAVC(viewerip=opts.viewerip, map=opts.map)

    if step == "fly.ArduPlane":
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip, map=opts.map)

    if step == "drive.APMrover2":
        return apmrover2.drive_APMrover2(viewerip=opts.viewerip, map=opts.map)

    if step == "build.All":
        return build_all()

    if step == "build.Binaries":
        return build_binaries()

    if step == "build.DevRelease":
        return build_devrelease()

    if step == "build.Examples":
        return build_examples()

    if step == "build.Parameters":
        return build_parameters()

    if step == "convertgpx":
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:travmason，项目名称:ardupilot-mpng，代码行数:67，代码来源:autotest.py

示例13: fly_CopterAVC

def fly_CopterAVC(viewerip=None, map=False):
    """fly ArduCopter in SIL for AVC2013 mission
    """
    global homeloc

    if TARGET != "sitl":
        util.build_SIL("ArduCopter", target=TARGET)

    sim_cmd = util.reltopdir("Tools/autotest/pysim/sim_multicopter.py") + " --frame=%s --home=%f,%f,%u,%u" % (
        FRAME,
        AVCHOME.lat,
        AVCHOME.lng,
        AVCHOME.alt,
        AVCHOME.heading,
    )
    if viewerip:
        sim_cmd += " --fgout=%s:5505" % viewerip
    sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
    sim.delaybeforesend = 0
    util.pexpect_autoclose(sim)

    sil = util.start_SIL("ArduCopter", wipe=True)
    mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter")
    mavproxy.expect("Received [0-9]+ parameters")

    # setup test parameters
    mavproxy.send("param load %s/copter_AVC2013_params.parm\n" % testdir)
    # mavproxy.send("param load %s/copter_params.parm\n" % testdir)
    mavproxy.expect("Loaded [0-9]+ parameters")

    # reboot with new parameters
    util.pexpect_close(mavproxy)
    util.pexpect_close(sil)

    sil = util.start_SIL("ArduCopter", height=HOME.alt)

    options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5"
    if viewerip:
        options += " --out=%s:14550" % viewerip
    if map:
        options += " --map"
    mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
    mavproxy.expect("Logging to (\S+)")
    logfile = mavproxy.match.group(1)
    print("LOGFILE %s" % logfile)

    buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
    print("buildlog=%s" % buildlog)
    if os.path.exists(buildlog):
        os.unlink(buildlog)
    try:
        os.link(logfile, buildlog)
    except Exception:
        pass

    # the received parameters can come before or after the ready to fly message
    mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
    mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])

    util.expect_setup_callback(mavproxy, expect_callback)

    expect_list_clear()
    expect_list_extend([sim, sil, mavproxy])

    if map:
        mavproxy.send("map icon 40.072467969730496 -105.2314389590174\n")
        mavproxy.send("map icon 40.072600990533829 -105.23146100342274\n")

    # get a mavlink connection going
    try:
        mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
    except Exception, msg:
        print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
        raise

开发者ID:nwind21，项目名称:ardupilot，代码行数:74，代码来源:arducopter.py

示例14: run_step

def run_step(step):
    """run one step"""

    # remove old logs
    util.run_cmd("/bin/rm -f logs/*.BIN logs/LASTLOG.TXT")

    if step == "prerequisites":
        return test_prerequisites()

    if step == "build.ArduPlane":
        return util.build_SIL("bin/arduplane", j=opts.j, debug=opts.debug)

    if step == "build.APMrover2":
        return util.build_SIL("bin/ardurover", j=opts.j, debug=opts.debug)

    if step == "build.ArduCopter":
        return util.build_SIL("bin/arducopter-quad", j=opts.j, debug=opts.debug)

    if step == "build.AntennaTracker":
        return util.build_SIL("bin/antennatracker", j=opts.j, debug=opts.debug)

    if step == "build.Helicopter":
        return util.build_SIL("bin/arducopter-heli", j=opts.j, debug=opts.debug)

    binary = binary_path(step, debug=opts.debug)

    if step == "defaults.ArduPlane":
        return get_default_params("ArduPlane", binary)

    if step == "defaults.ArduCopter":
        return get_default_params("ArduCopter", binary)

    if step == "defaults.APMrover2":
        return get_default_params("APMrover2", binary)

    if step == "fly.ArduCopter":
        return arducopter.fly_ArduCopter(
            binary, viewerip=opts.viewerip, use_map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb
        )

    if step == "fly.CopterAVC":
        return arducopter.fly_CopterAVC(
            binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb
        )

    if step == "fly.ArduPlane":
        return arduplane.fly_ArduPlane(
            binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb
        )

    if step == "fly.QuadPlane":
        return quadplane.fly_QuadPlane(
            binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb
        )

    if step == "drive.APMrover2":
        return apmrover2.drive_APMrover2(
            binary, viewerip=opts.viewerip, map=opts.map, valgrind=opts.valgrind, gdb=opts.gdb
        )

    if step == "build.All":
        return build_all()

    if step == "build.Binaries":
        return build_binaries()

    if step == "build.DevRelease":
        return build_devrelease()

    if step == "build.Examples":
        return build_examples()

    if step == "build.Parameters":
        return build_parameters()

    if step == "convertgpx":
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:senosahisnu，项目名称:ardupilot，代码行数:79，代码来源:autotest.py

示例15: run_step

def run_step(step):
    """run one step"""
    if step == "prerequesites":
        return test_prerequesites()

    if step == "build.ArduPlane":
        return util.build_SIL("ArduPlane")

    if step == "build.APMrover2":
        return util.build_SIL("APMrover2")

    if step == "build.ArduCopter":
        return util.build_SIL("ArduCopter")

    if step == "build2560.ArduCopter":
        return util.build_AVR("ArduCopter", board="mega2560")

    if step == "build2560.ArduPlane":
        return util.build_AVR("ArduPlane", board="mega2560")

    if step == "build2560.APMrover2":
        return util.build_AVR("APMrover2", board="mega2560")

    if step == "defaults.ArduPlane":
        return get_default_params("ArduPlane")

    if step == "defaults.ArduCopter":
        return get_default_params("ArduCopter")

    if step == "defaults.APMrover2":
        return get_default_params("APMrover2")

    if step == "logs.ArduPlane":
        return dump_logs("ArduPlane")

    if step == "logs.ArduCopter":
        return dump_logs("ArduCopter")

    if step == "logs.CopterAVC":
        return dump_logs("ArduCopter", "CopterAVC")

    if step == "logs.APMrover2":
        return dump_logs("APMrover2")

    if step == "fly.ArduCopter":
        return arducopter.fly_ArduCopter(viewerip=opts.viewerip, map=opts.map)

    if step == "fly.CopterAVC":
        return arducopter.fly_CopterAVC(viewerip=opts.viewerip, map=opts.map)

    if step == "fly.ArduPlane":
        return arduplane.fly_ArduPlane(viewerip=opts.viewerip, map=opts.map)

    if step == "drive.APMrover2":
        return apmrover2.drive_APMrover2(viewerip=opts.viewerip, map=opts.map)

    if step == "build.All":
        return build_all()

    if step == "build.Binaries":
        return build_binaries()

    if step == "build.Examples":
        return build_examples()

    if step == "build.Parameters":
        return build_parameters()

    if step == "convertgpx":
        return convert_gpx()

    raise RuntimeError("Unknown step %s" % step)

开发者ID:brnjones，项目名称:ardupilot，代码行数:72，代码来源:autotest.py

注：本文中的util.build_SIL函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python util.build_context_script函数代码示例发布时间：2022-05-27

Python util.between函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13886|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10276|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4134|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4054|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3878|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3528|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3056|2022-01-22

8 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2694|2022-01-22

9 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2677|2022-05-25

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2331|2022-01-22

客服电话

电子邮件

Python util.build_SIL函数代码示例

示例1: fly_CopterAVC

示例2: run_step

示例3: run_step

示例4: run_step

示例5: run_step

示例6: run_step

示例7: fly_ArduCopter

示例8: fly_CopterAVC

示例9: fly_ArduCopter

示例10: run_step

示例11: fly_ArduCopter

示例12: run_step

示例13: fly_CopterAVC

示例14: run_step

示例15: run_step

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053